Routine Cleaning for Interior Stone Floors

HANAFINN Rejuvenata Active™ contains 3 types of natural active enzymes that quickly break down oil, grime, food residue, bacteria and mold. It is environmentally-responsible and safer to use than many traditional chemical cleaners.

For Light Duty Cleaning

Before You Clean

Begin by removing all loose dust and debris from the surface by sweeping or vacuuming. Pour 2-5 capfuls of Rejuvenata Active™ into 2 gallons of clean, warm water. Stir briefly. Heavily soiled areas may require a higher concentration.

To Clean

• Mop the surface, rinsing the mop frequently.
• If the cleaning solution becomes too dirty, rinse the mop throughly in clean water and mix together a new solution to continue mopping.
• Higher concentration solutions will leave a residue after mopping which should be mopped off with fresh water.
• Light cleaning can be performed as regularly as necessary.

Heavy Duty Cleaning & Stain Removal

To be performed if the buildup of dirt and grime is too much for normal cleaning.

Before You Clean

In a bucket, dilute approximately 1.5 cups of Rejuvenata Active™ per gallon of clean, warm water. Concentration can be increased if necessary.

To Clean

• Generously apply the cleaning solution to the surface and leave for a few minutes to allow the enzymes to break down the dirt.
• Before the cleaner dries on the surface, scrub with a suitable brush or deck scrubber.
• Rinse thoroughly after cleaning with clean water and a mop.

Conditional Cleaning for Interior Stone Floors

HANAFINN Eff-Erayza™ is the ultimate safe acid cleaner for eliminating efflorescence, lime and hard water deposits, soap scum, rust and grout haze from non-acid sensitive materials.

HANAFINN Oxy-Klenza™ is a powerful triple action oxygen-based outdoor cleaner and stain remover for natural stone and other hard porous surfaces.

Before You Clean

Begin by removing all loose dust and debris from the surface using a clean microfiber cloth. Dampen the surface with water. Fill a standard 2.5 G / IOL bucket with clean water (3/4 of the way). Mix in the amount of Eff-Erayza™ recommended below. Add more Eff-Erayza™ if needed.

For Efflorescence, Rust, Fireplace Soot - 1/2 Qt bottle of Eff-Erayza™ (approx. 500 mL)

Grout Haze, Limescale, Soap Scum - 1/4 Qt bottle of Eff-Erayza™ (approx. 250 mL)

Mortar - 1 Qt bottle of Eff-Erayza™ (946 mL)

To Clean

Apply Eff-Erayza™ when surface temperature is between 40 - 95 °F (5 - 35 °C).

• Pour, brush or spray mixed solution generously onto dampened surface and. Leave the solution for approximately 3 minutes.
• Do not allow solution to dry on surface. Clean large areas in sections.
• Rub with a white nylon scrub pad, or similar, to clean the surface.
• To neutralize the acid, dissolve 1 cup of Oxy-Klenza™ (or similar pH base/alkaline cleaner) into a second bucket of fresh water and pour it over the surface. Let it sit for approximately 3 minutes.
• Rinse surface thoroughly several times with clean water using a mop or wet vacuum.

Eff-Erayza™ Important Notes & Warnings: Test product on a small area to check for acid sensitivity before full application. Eff-Erayza™ will still etch acid sensitive materials such as marble, limestone, travertine, and onyx.

Cleaning for Interior Stone Countertops

HANAFINN Rejuvenata™ spray is a gentle daily cleaner for natural and engineered stone countertops. It contains an invisible sealer to enhance protection and make surfaces easier to clean.

Before You Clean

Begin by removing all loose dust and debris from the surface using a microfiber cloth.

To Clean

Apply Rejuvenata™ when surface temperature is between 40 - 95 °F (5 - 35 °C).

• Generously apply Rejuvenata™ spray to surface.
• Lightly polish using a soft, absorbent lint-free cloth or paper towel to remove excess.
• Repeat this process for heavily soiled areas.
• We recommend sealing stone countertops with STAIN-PROOF Original™ or MetaCreme™.

Cleaning for Exterior Stone

Oxy-Klenza™ is an oxygen-based, chlorine-free cleanser that effectively breaks down organic stains. It is environmentally-responsible and safer to use than many traditional chemical cleaners.

Before You Clean

To Clean

• Using a mop, apply the solution to the surface. Let sit for 3 minutes.
• Do not allow solution to dry on surface. Scrub and brush surface with a gentle, nylon scrub pad or brush.
• Rinse solution completely off of surface using clean water.
• Cleaning can be performed as regularly as necessary to prevent the build up of grime and dirt.

Oxy-Klenza™ Important Notes & Warnings: Do not seal container with mixed solution, as it may expand, rupture and cause injury. Do not use products near ignition sources or open flames.

Important Notes & Warnings for all HANAFINN Products: Products may be corrosive to metals, cause skin irritation, cause serious eye damage, and may cause respiratory irritation. Do not smoke, ingest or inhale fumes of any product. Keep reach out of children. Read label before use. Wear proper protective equipment, including gloves, clothing and eye protection while using these products. Protect surrounding areas from contact with products. Wash hands thoroughly after applying. This product can be purchased from Exquisite Surfaces. Please visit drytreat.com for additional information.

The information provided in this document is intended for general reference only. Please contact your Exquisite Surfaces sales representative directly for complete care and maintenance recommendations for your products.